Glowshift Elite 10 Color Series Tachometer Gauge Uživatelský manuál stáhnout pdf (Strana 1)

Elite 10 Color Series Tachometer Gauge

For Product Numbers: GS-ET10 & GS-EWT10

Wire Harness Color Code

Red:

12v Constant (un-switched) Source (+)

Black:

Vehicle / Engine Ground (-)

White:

12v Ignition (switched) Source (+)

Orange:

12v Dimmer (switched) Source (+) (optional)

1. Disconnect the negative battery cable.

2. Connect the white wire to the back of the gauge (port D) and

run it through your firewall and to your vehicle’s tachometer

source wire or negative side of the coil. You must consult your

manual to ensure proper location. If connecting to an aftermarket

ignition system, be sure to follow the manufacturer’s instructions

for connecting a tachometer. Please consult a service manual or

mechanic before installing.

 Tachometer Test Wire: Some vehicles may have a

tachometer test wire to obtain a tachometer signal from.

Consult your repair manual or licensed mechanic to

confirm the location of this wire.

 Tachometer Adapter: It may be necessary to install a

Tachometer Adapter if you have a multiple coil system.

You can purchase a Tachometer Adapter from local auto

parts store.

 Tachometer Filter: It may be necessary to use a

Tachometer Filter if you vehicle has either a points style

or HEI ignition system. You can purchase a Tachometer

Filter from www.GlowShift.com

 Note: Be sure to use a grommet when routing wires

through the firewall to protect them from stripping and

damage.

3. Connect the white wire to a positive 12 volt ignition (switched)

source. It may be connected to the fuse panel, an accessory wire,

or any positive 12 volt source that turns on and off with the

ignition switch of the vehicle.

4. Connect the red wire to a positive 12 volt constant (un-switched)

source, either directly to the battery or to a fuse panel on the vehicle.

 Note: If wiring to an un-fused source, install a 3 amp fuse

inline within 20 inches of the sources connection. You may

obtain an optional “expandable circuit” accessory. This

component easily fits into your fuse panel and provides an

additional fused power wire for accessories such as gauges.

This is available at www.GlowShift.com or a local auto

parts store.

5. The Night Time Dimming feature decreases the brightness of the

gauge face by 30%. Connect the orange wire to the 12 volt positive

headlamp source. This allows the mode to be activated when the

headlights come on. This step is optional and will not affect

operation of the gauge if it is omitted. NOTE: Do not connect the

orange wire to a dimmer wheel. This will cause the gauge

lighting to flicker.

6. Connect the black wire from the gauge, to any good (unpainted)

ground connection. You may also route a wire directly to the

negative side of the vehicle’s battery.

7. Reconnect the negative battery cable.

8. Daisy Chain Feature (Optional): If you are installing more

than one Elite 10 Color Gauge, you can use the daisy chain feature

to power up to 4 additional gauges. Simply plug the included daisy

chain wire into the gauge that is already powered (port B); then

plug the other end of the wire into the daisy chain port on the next

gauge.

1 2 3

Operating Instructions 2

Shrnutí obsahu

Strany 1

Elite 10 Color Series Tachometer Gauge For Product Numbers: GS-ET10 & GS-EWT10 Wire Harness Color Code Red: 12v Constant (un-switched) Source

Strany 2 - Operating Instructions

Operating Instructions 1. Cylinder selection mode: 1. You must set the number of cylinders for your vehicle has, so that the gauge will operate pr

Strany 3

ONE YEAR NON-TRANSFERRABLE LIMITED WARRANTY AND DISCLAIMER GlowShift Gauges, LLC ("GlowShift") warrants to the original retail consumer p

Komentáře k této Příručce

Žádné komentáře

Glowshift Elite 10 Color Series Tachometer Gauge Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Pro auto Glowshift Elite 10 Color Series Tachometer Gauge. GlowShift Elite 10 Color Series Tachometer Gauge User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Glowshift Elite 10 Color Series Tachometer Gauge Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Pro auto Glowshift Elite 10 Color Series Tachometer Gauge. GlowShift Elite 10 Color Series Tachometer Gauge User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Pro auto Glowshift Elite 10 Color Series Tachometer Gauge